The new AS series builds upon the success of the MS series to represent a new level of performance and cost. These probes feature a choice of 316 stainless steel or graphite electrodes, Noryl shells and encapsulated interiors that will satisfy just about any industrial or municipal application. This technology, insures that, with reasonable maintenance, years of drift-free performance can be expected. Six cell constants from 0.1 to 50 are available to cover any water sample between pure water and brine. All types are designed with a safety stop shoulder on the cell.
Integral automatic temperature compensation is standard. A compression fitting which allows adjustable insertion length in 3/4 inch NPT piping or in the side of a tank. Submersion mounting is achieved by reversing the direction of the compression fitting, allowing the cell to be threaded into the MHMSC mounting hardware. Mounting hardware is available for hanging on the rim of the tank. A ball valve (“hot-tap”) types permit removal of the cell from process piping or from tanks without shutting down the system.
- Choice of 316 SS or graphite electrodes
- Noryl shell with epoxy body
- 3/4″ NPT CPVC or SS compression fitting
- Economically priced
- Automatic temperature compensation with choice with thermistor or RTD
- Constants from 0.01 to 50
- Hot tap versions available